NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.09.00
01/28/2026

•    Added support for the initial release of the iQUBE3
•    UI – 12-inch screens, Wi-Fi Direct button no longer overlapping with text 
•    Wi-Fi Direct connection information now displays correctly when the button is pressed 
•    DIO – DIO outputs no longer stay set when in setup mode
•    Removed incorrect labeling of “Half Duplex” on the port type selection
•    FB.NETWORKTYPE value is no longer reset with a resetconfiguration command 
•    Firmware version for fieldbus no longer shows as VX.XX.XX.XXXX in DUMPVERSIONS command response 
•    iRite – SetSPValue no longer returns SysInvalidRequest when using the product of two multiplied values 
•    Pressing rezero on newly created scale no longer causes a spinning wheel lockup
•    UI – Widgets no longer appear briefly on the screen if visibility is set to false
•    iRite SysCode Error – The correct SysCode error is returned for ZeroScale 
•    <SU> token no longer strips preceding zeros from a format 
•    Softkeys – Entering a decimal character no longer breaks the scale select button 
•    iRite – SetTare now correctly returns SysPermissionDenied instead of SysInvalidRequest when keyed tares are disabled 
•    Accumulator tokens are now correctly compatible with /P, /D, /S and /T modifiers
•    UI Audit trail view no longer has a visual overflow of data into the footer area 


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.08.00
10/08/2025

•    Alibi Lookup Feature – Look up records in the Alibi menu searching by AN
•    Calibration – Canceling Rezero no longer causes the screen to lock up
•    Fieldbus UI Additions – Additional parameters for the fieldbus card have been added to the UI
•    iRite – Attempting to SetPrintText 0 now correctly returns SysInvalidRequest 
•    iRite – SetPrintText for user string 99 no longer returns SysInvalidRequest 
•    iRite – UnlockKeypad no longer returns SysLFTViolation 
•    iRite – RealToString now treats negative precision values as zero 
•    EDP – REGULAT EDP command no longer accepts NMI and INMETRO as options, they are handled by other commands
•    Setpoints – Concur setpoints can now be activated after the first batch sequence 
•    Print Token – Number of Weighments token will now print correctly
•    UI – iRite API SetWidgetVisibility will now turn on/off line widgets
•    EDP – Moved small subsection of WIFI related parameters behind the seal
•    Print – Pressing print after display accumulator no longer causes a reboot when using a minimum print weight greater than 0
•    MRMI – The range can no longer be set above scale capacity
•    iRite – SetSPTim and GetSPTime are now working as expected
•    Print Token – Unit specific accumulator print tokens now function as intended
•    Printing – Consecutive number is now incremented after the entire format is printed
•    Added support for different display panel types in future updates


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.07.06
02/28/2025

•	MRMI Range indications not showing up in certain scale widgets


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.07.05
01/22/2025

•	Corrected issue in tweak wizard


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.07.04
11/15/2024

•	Allow motion detection flag to be reported through API when scale is overloaded


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.07.03
10/25/2024

•	In some situations the 1280 may return to its iQube2 default settings  


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.07.01
8/29/2024

•	Scale division size may not match the displayed division on power up


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.07.00
6/3/2024

•	Total scale – Must follow restrictive setting for tare with child scale
•	Total scale – Correct overload behavior to align with 920i
•	Fieldbus – Corrected an issue with the fieldbus card version check for new boards 


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.06.01
1/4/2024

• 	Corrected issue with the light sensor and auto-backlight control


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.06.00
1/2/2024

• 	Added the Net Update feature to the 1280 
• 	Serial – 1200 and 2400 baud cause issues with long pauses in data 
•	Setpoint – Screen has text outside of the buttons 
• 	iQube2 – Tweak Calibration menu causing restart error 
• 	Multi-point Calibration – Busy spinner stuck loading point data 
• 	Calibration – Finish button is accessible before values update 
• 	Calibration – If REZERO calibration only, it takes longer than previous versions 
• 	Calibration – Theoretical calibration finish button is available before values update 
• 	Configuration – Features Softkeys - the click for the individual softkey menu is shifted to the right border 
• 	Database – Not truncating data for columns with the fixed length 
• 	DLC – Filtering is being accepted, but not updated on the 1280 screen
• 	DLC – Load cell address assignment was difficult when current address is unknown 
• 	UI – Alert History display in weigh mode was added 
• 	UI – Captions show up briefly on-screen refresh
• 	UI – Performance mode Yes/No pop up has a graphic bar above the buttons
• 	UI – Unlock calibration values button missing
• 	UI – Calibration feature from side menu hangs on span calibration
• 	UI – Menu selecting an assigned softkey is hard to do
• 	UI – Add a system menu button at the bottom of the main config menu list
• 	iRite – Setpoint reset handler working
• 	iRite - Calling space API with a negative value reboots the indicator
• 	Core – Added capability to display and handle scale card features
• 	Serial Stream – Toledo output format converts decimal weights incorrectly
• 	Serial Stream – Toledo output motion bit is inverted
• 	Serial Stream – TF#1 is returning weight values when the status is invalid

NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.05
10/16/2023

Non-Legally-Relevant Changes:
•	Backlight does not change brightness with manual settings


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.04
02/17/2023

Legally-Relevant Changes:
•	Add Australia mode to regulatory parameters


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.03
02/03/2023

• 	Add support for new widget with monospace font


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.02
11/22/2022

• 	Menu – When Spanish is selected, some values are overlapping in the menu
• 	Menu – Remove button overlapping with linear point value
• 	iQube2 – Section tweak does not allow selection of a section
• 	iQube2 – Add “Please Wait” message for full tweak operation
• 	iQube2 – Corner tweak loadcells do not populate
• 	EDP – 1280 not accepting old command for font selection
• 	Setpoint – Restart issue when going into UI label bound to a setpoint

NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.01
10/20/2022

• 	Adding core capability to display/handle scale card errors
• 	Adding new text label font

NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.05.00
06/06/2022

Non-Legally-Relevant Changes:
•	iQube 2 Diagnostics – Deadload info added to cell
•	Total Scale – Allow iQube child scales in industrial mode
•	UI Email Config Menu – Add SMTP to server address and server port text
•	GetDigout and GetDigIn commands doesn’t respond with correct syscode
•	Setpoint timer functionality bug
•	New total scale parameters for UI
•	iQube 2 error messages missing data
•	FTP- correct ftp user password from always being set – even when not enabled
•	Diagnostics – iQube 2 cell error and emulation color not clearing 
•	UI – Make fieldbus slots hardware dependent
•	Add iQube 2 diagnostics to flyout keyboard in red bar
•	Setpoint – Time of day value does not save when edited from weigh mode side bar
•	Display status line is in wrong location 12inch display
•	PERFMODE command can respond with incorrect setting
•	Keyboard lock – motion can bypass keyboard lock
•	iQube 2 – Blue menu doesn’t show config pages after the first
•	iQube 2 – Exiting and re-entering setup mode causes nav bar to lockup
•	UI – Leaving iQube 2 configuration menu exits to black screen
•	Setpoints – percent relative SPs add their value to the source SP value
•	Add new config item to enable/disable the TCP/IP EDP command server
•	Contact Info – string length mismatch between UI, EDP command, revolution
•	Diagnostics screen bug
•	Email core – email username portion does not allow more than one period
•	Save and exit touch screen area is inconsistent
•	Setpoint access from the run screen does not function for more than on SP
•	Print – headers don’t print in the correct position in a line and include extra NL
•	Print token – SP name token does not print anything
•	iQube 2 logo glitches when pressed
•	iQube 2 live diagnostic screens cosmetic issues
•	UI – Option to set units for program scale
•	iQube 2 – Adjusting too quickly on corner tweak zeroes load cell weight
•	UI – Unlock calibration values button missing
•	iQube 2 – Live diagnostics screen
•	12” display iQube 2 diagnostics screen can’t scroll right
•	Audit trail UI
•	Stream format <W07> behaves like <W07.> token
•	OIML – SC.OVERLOAD default should be FS+9D, not FS+2%
•	Calibration – Temp zero calibration via EDP does not work
•	Calibration – Last zero calibration via EDP does not work
•	Accumulator value is occasionally being reset
Legally-Relevant Changes:
•	Total scale options for countby


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.04.03
02/01/2022

•	External keyboard occasionally causes the scale widget to report dashes
•	TCP/IP connections closing when large amounts of data are being transmitted 


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.04.02
12/10/2021

•	Allow iQube2 scales to be part of a total scale 


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.04.01
11/19/2021

•	iQUBE 2 diagnostic screen correction load cell emulation


NOTICE OF SOFTWARE RELEASE: 1280 Firmware v2.04.00
11/12/2021

Non-legally relevant changes:
•	Overload and Underload characters adding one more character to the W7 token 
•	LockKey() iRite API function does not stop keypad tare operation after being called 
•	DIO do not change state when iQube 2 or serial scale lose communications 
•	GetLCCD() iRite API function does not work for iQube2 scales 
•	GetWVAL() iRite API function returns zero for iQube2 scales 
•	GetCountby() iRite API function always returns zero for total scales
•	Fieldbus not producing any data, and is not communicating properly 
•	Onboard CPU temperature sensor not working properly 
•	iQube 2 to 1280 communications issue using Lantronix ethernet to serial module 
•	iQube 2 cancelling calibration requires exiting config 
•	iQube 2 display live weight during calibration 
•	TCP connections are not discarding data when there is no client connection 
•	1280 UI iQube 2 secondary units shows a non-functioning multiplier 
•	IRite program load to update new counter and show on UI 
•	iRite chart render and ChartInsertToExisting() can’t call multiples in sequence 
•	Web display – chart widgets will not display in browser 
•	Add Chinese translations 
•	Network Port 1024 not allowed to be configured as client 
•	Alert history viewer added 
•	iQube 2 – Diagnostic screen UI changes 


Legally relevant changes:
•	CoZ bug when scale is set to Canada regulatory mode 
•	Multi-interval range selection should be based on display weight 